Wet Ventury Scrubbers :

WORKING PRINCIPLE

• The gas is accelerated in the venturi. The liquid is sprayed just above the throat of the venturi covering the entire gas path.

• The contaminants impact on the finely sprayed droplets and become heavier.

• The gas and liquid flow concurrently downwards into a cyclonic mist eliminator.

• The heavier contaminant particles are separated by centrifugal action in the cyclone.

• The clean gas leaves the cyclones from the top and is exhausted through I.D. Fan to chimney/stack.

• The I.D. Fan provides the necessary gas flow at designed pressure drop.

• The scrubbing liquid separated from cyclone is collected in the circulating tank.

•  The liquid passes through filter where solids get separated and liquid is given to circulating pump.

• The circulating pumps the liquid to nozzle for atomization.

• The systems can be manual or fully automatic.
  

Next  Back